CLEANING AND SEALING NATURAL STONE , CONCRETE BLOCK PAVING AND OTHER SURFACES

All our products are designed to be used by general public and there are step by step instructions on each bottle.

However before you start there are certain factors that you need to take into consideration, like:

The size of the paved area that you need to clean and seal

You need to know what type of paving you have, i.e. natural stone, concrete block paving or paving slabs for example. Then you need to measure the area. Regarding the cleaner, we can only give an average coverage as this largely depends on how stained your paving is. The dirtier it is the more cleaning product you will need and more than one application may be required.

For the sealers please refer to this coverage chart to give you an estimate of the product is required.

Structural damage to the surface

In some cases it may be necessary to bring in a specialist because your stone may need to be repaired first due to structural damage. Or on some occasions the stone is so deeply ingrained with dirt that it can be difficult to clean without the additional aid of high powered cleaning machines. If your stone falls into this category we are happy to recommend a specialist in your area. Simply click here to connect with an expert.

No special equipment is generally required, for sealers you will simply need a paint roller and a tray and some clean absorbent cloths.  For the cleaners a deck brush maybe good to use to agitate the cleaner on the surface. For very large areas a power washer would be helpful to save time.

And just to illustrate how easy it is, take a look at this application video for Dry Treat Stain Proof application